The IoT & Device

Management Company

Friendly Blog

The expert opinion on IoT, Smart Home and TR-069 Device Management.

Browse by Category

Back to posts
TR-069 News | Jun 08, 2017

All CPEs are Not Created Equal: Choosing a CPE Wisely – So That TR-069 Runs Smoothly on Your Network Part 2

All CPEs are Not Created Equal:

Choosing a CPE Wisely –
So That TR-069 Runs Smoothly on Your Network

Part 2

Want to Learn More? See Also Part 1 and Part 3

As discussed in part 1 of this post, your choice of CPE plays an important role in determining how smoothly TR-069 runs on the network. Here are some additional dos and don’ts in choosing the right CPE that effectively meets the needs of your company.

Tip 4: Don’t Overload the ACS with QoE Monitoring

If your company needs to monitor CPEs, it’s best to use lightweight notifications. Some devices support lightweight notifications, while others do not.

When a device supports lightweight notifications, all QoE data is sent to a separate server rather than the ACS. This important feature allows you to collect QoE information without putting an extra load on your ACS.

Most CPEs do not support this feature yet. If the CPE that you prefer does not support lightweight notifications, verify that it does support active and passive notifications.

Tip 5: Verify Your CPE Offers Support for STUN and XMPP

If you need to support LAN devices such as STB, or any Over-the-Top device, check the CPE supports this feature. CPEs that installed behind a NAT device require the support of TR-111 using the Stun Client option – or by using XMPP, as defined in TR-069 Amendment 6.

You must also verify that your ACS server supports both STUN and XMPP. While Friendly’s solution supports both STUN and XMPP, many alternatives do not provide this support.

Tip 6: Check for Automatic Hosts Status Refresh

True story: One of Friendly’s customers asked us to provide him with an updated network map, including an updated list of all of the devices connected to the CPE including PCs, mobile phones, Android devices, etc.

We discovered that some CPEs do not update their hosts list all of the time, and do not remove devices that are no longer connected – and, as a result, our customer’s network map was incorrect.

When selecting a CPE, keep in mind that the CPE must immediately refresh the hosts list, including currently connected devices, and related parameters such as MAC, IP, description, and speed.

This is the second of a three-part post about how to choose the right CPE for your network. For additional tips on how to choose a CPE, see part 1 and part 3.

Ilan Migdal

Subscribe for the updates